Brake pads · Brake rotors · Brake shoes
Brake Parts Manufacturer for Auto Parts Stores & Repair Shops
Source brake pads, brake rotors and brake shoes through one B2B purchasing process.
Guangdong Zhenlong Brake Parts Co., Ltd. is a brake manufacturer in China supplying aftermarket brake parts to auto parts stores, repair shops, distributors and importers that need reliable product matching, stable quality, repeat supply and practical wholesale support.
You do not need to search through a consumer-style vehicle catalog or build your order one product at a time. Send us the purchasing list you already use. We review the required brake parts, confirm the available products, prepare the quotation and organize production or stock preparation around your order.
D1210-8461Brake pad1,200BR-31395Rotor640S-786-1114Brake shoe380D1324-8673Brake pad900BR-900412Rotor500Already have OE numbers, supplier part numbers or an Excel purchasing list? Send them as they are. You do not need to rebuild the order for us.
Core Brake Product Categories
Brake Pads · Brake Rotors · Brake Shoes
Production Lines
Dedicated production capacity for brake parts supply.
Pieces Daily Capacity
Supporting regular B2B and repeat purchasing programs.
Years of Brake Parts Experience
Experience in brake parts production, quality control and aftermarket supply.
Product range
Brake Parts From One Supplier: Brake Pads and Rotors, Plus Brake Shoes
Focused Range, Deeper Product Knowledge
Our product range is intentionally focused. Instead of trying to supply every automotive component, we concentrate on three core brake-product categories that are widely used by aftermarket parts stores and repair businesses.
This helps us build deeper production, quality-control and technical knowledge around the products we supply.
Brake pads — multiple references together
Wholesale Brake Pads
We supply brake pads for passenger cars, SUVs and light trucks using different friction-material directions according to the vehicle and market requirement.
Brake rotors — solid + vented in one frame
Wholesale Brake Rotors
We supply standard replacement solid and vented brake rotors for passenger cars, SUVs and light trucks.
Product & QC focus
- Outside diameter
- Nominal thickness
- Overall height
- Center bore
- Mounting pattern
- Runout
- DTV
- Friction surface finish
- Cooling vane quality
- Hub mounting face
Brake shoes — one rear drum brake set
Wholesale Brake Shoes
We supply replacement brake shoes for rear drum brake and applicable parking-brake systems.
Correct identification may depend on
- Shoe width
- Radius
- Spring-hole position
- Lining dimensions
- Parking brake connection
- Drum-brake configuration
- Surrounding hardware
The fastest way to start
Already Have a Purchasing List? Send It to Us.
Professional Buyers Do Not Start From an Empty Cart
Most professional brake-parts buyers do not start purchasing from an empty shopping cart. You already know what your business sells, stocks or installs.
Use that information. You do not need to manually search our website and recreate the entire order.
You may already have
If You Have an Excel Purchasing List
Upload the complete file. Include part numbers, quantities and any product or packaging notes you already have.
Our team can review the list as one B2B inquiry instead of treating every product as a separate request.
If You Have Current Supplier Numbers
Changing suppliers does not mean rebuilding your brake parts range from zero.
Send the supplier references you currently use and we can use them as a starting point for product review.
If You Only Have Product Photos
Send the available product photos together with dimensions, packaging information or vehicle details.
We can tell you what additional information may be needed before quotation.
If You Purchase Multiple Product Categories
Brake pads, brake rotors and brake shoes can be included in the same purchasing inquiry.
You do not need to create three separate projects.
Purchasing process
From Purchasing List to Shipment
Seven Steps, Built Around How B2B Buyers Already Work
Our purchasing process is built around the way B2B brake-parts buyers already work.
You send the requirement. We help organize the product, quotation, production and shipment process.
Step 1 — Send Your Purchasing List
Send your Excel file, part numbers, quantities, product photos or existing supplier references.
Packaging and target-market information can also be included at this stage.
- Part numbers or supplier references
- Quantities per reference
- Packaging requirement
- Destination market
Step 2 — Product Review
Our team reviews the requested products and identifies which items can be supplied.
Where information is incomplete, we ask for the specific details needed to continue.
- Brake pads: reference & friction direction
- Brake rotors: dimensions & type
- Brake shoes: geometry & set content
Step 3 — B2B Quotation
The quotation is organized around the actual SKU list, quantity, packaging requirement and product specification.
This makes it easier for your purchasing team to compare and approve the order.
- SKU list as you sent it
- Quantity per reference
- Packaging requirement
- Product specification
Step 4 — Product & Packaging Confirmation
Before production or stock preparation, the confirmed order should clearly identify: product reference, quantity, specification, label and packaging requirement.
- Product reference
- Quantity
- Specification
- Label & packaging
Step 5 — Production or Stock Preparation
Available stock can be prepared for shipment while production items enter the relevant manufacturing process.
- Stock items: prepared for shipment
- Production items: enter the relevant line
Step 6 — Quality & Packaging Inspection
Products are checked according to the relevant product category before shipment.
Part number and packaging accuracy are also reviewed.
- Product-specific inspection points
- Part number accuracy
- Label & packaging accuracy
Step 7 — Shipment & Repeat-Order Support
After shipment, clear product references and order records make future replenishment easier.
You send the list. We handle the brake parts supply process.
- Product references
- Packaging records
- Order history
You send the list. We handle the brake parts supply process.
Solutions
Aftermarket Brake Parts Solutions for the Way Your Business Operates
Same Part, Different Business Problem
A parts store and a repair shop may purchase the same brake part, but they do not face the same business problem.
Our solutions are organized around those differences.
Distributor warehouse — mixed SKU brake stock
Auto Parts Store & Distributor Solution
Whether you run an auto parts distributor business or supply garages as a US motor factor, your challenge is not simply buying products. It is managing a usable product range.
You need to know:
- Which SKUs to stock
- How to mix different references
- How to reduce wrong-part returns
- How to label products clearly
- How to reorder fast-moving items
- How to build your own brand where required
If brake parts are one line within your wholesale car parts range, we help you purchase brake pads, rotors and shoes around your existing inventory structure instead of forcing you to adopt a consumer-style product-search system.
Repair shop — technician measuring a rotor / drum
Repair Shop & Installer Solution
Your biggest cost is not always the price of the brake part.
Repeat labor, wrong fitment and unresolved brake complaints can cost much more.
Our repair-shop support focuses on:
- Correct replacement-part selection
- Product-specific technical information
- Common brake noise diagnosis
- Brake vibration analysis
- Uneven wear investigation
- Drum brake troubleshooting
- After-sales evidence collection
Why Zhenlong
Why B2B Brake Parts Buyers Work With Zhenlong
A B2B brake parts supplier should make purchasing easier, quality more predictable and repeat ordering more manageable. That is the standard we build our supply process around. Unlike an auto parts manufacturer spread across hundreds of unrelated product lines, we stay focused on brakes — here is why distributors choose us.
12+ Years Experience
Focused on brake parts manufacturing and aftermarket supply since 2014 — brake pads, brake rotors and brake shoes.
Direct Factory Supply
Your purchasing list goes straight to the production side, with no trading layers between your order and the factory.
One-Stop Brake Parts Sourcing
Brake pads, brake rotors and brake shoes reviewed, quoted and shipped through one purchasing process.
Fast Parts-List Quotation
Send the Excel list or part numbers you already use. We review it as one order and quote the full product mix.
Compliance-Oriented Production
Documentation such as ECE R90 and REACH is reviewed against the actual product and the destination market.
Distributor & Repair Network Support
Mixed-SKU orders, private label packaging and after-sales technical review for distributors and repair networks.
OE & VIN-Based Number Matching
Send OE numbers, current supplier references or VIN details, and we cross-reference them to the right application.
Send Your Purchasing List Now
One list, one quotation, organized around your actual requirements.
Manufacturing
Manufacturing Capabilities Behind Our Brake Parts Supply
Organized Around the Three Categories We Supply
Stable wholesale supply depends on more than having finished products in a catalog. Production control needs to support consistent dimensions, materials, machining and finishing across repeat orders.
Our manufacturing capabilities are organized around the three brake categories we supply. See our brake pad factory in Qingyuan for the full production workflow.
Brake Pad Manufacturing
The brake pad production process includes controlled stages such as:
Friction performance depends on both material formulation and production consistency.
Brake Rotor Manufacturing
Brake rotor production combines casting and precision machining. Critical processes include:
Machining accuracy is especially important for rotor dimensions, friction surfaces and mounting areas.
Brake Shoe Manufacturing
Brake shoe production focuses on the relationship between the steel shoe body, friction lining and fitment-critical geometry. Key stages include:
Technology & process
Consistent Brake Parts Start With Process Control
Quality Is Built In Before the Inspection Table
Final inspection cannot fix an unstable production process.
Quality needs to be built into the product before it reaches the inspection table.
Equipment parameter panel
Friction material mixing
Measuring instrument reading
Material Control
Brake friction materials, castings and steel components all need stable incoming material quality.
Material variation can later affect dimensions, friction behavior, wear or durability.
Process Parameters
Depending on the product, critical process factors can include:
Final Verification
The final stage confirms whether the completed product matches the required product and order specification before packaging.
Quality control
Quality Control Based on the Product — Not One Generic Checklist
Different Products Fail Differently
A brake pad does not fail in the same way as a brake rotor. A brake rotor does not require the same inspection points as a brake shoe.
For that reason, our quality-control process focuses on the characteristics that matter to each product.
Brake pads inspection
Brake Pad Quality Checks
- Overall dimensions
- Friction material
- Backing plate
- Shim installation
- Slots
- Chamfers
- Surface condition
- Product marking
- Packaging accuracy
Brake rotors inspection
Brake Rotor Quality Checks
- Rotor dimensions
- Runout
- Disc thickness variation
- Friction surface finish
- Hub mounting face
- Cooling vanes
- Casting edges
- Rust protection
- Packaging
Brake shoes inspection
Brake Shoe Quality Checks
- Shoe geometry
- Shoe width
- Lining dimensions
- Lining position
- Lining attachment
- Spring-hole location
- Steel shoe finish
- Correct set packaging
Inspection priorities follow the product, not a single generic form. See how we approach friction testing.
Certifications & testing
Certifications & Standards
Recognized certifications supporting our brake parts manufacturing and global B2B supply, including our IATF 16949 and ECE R90 certifications. Different markets may require different documentation — we recommend confirming the required standard together with the actual brake part and destination market.
IATF 16949 certificate scan
IATF 16949 Certification
AMECA certificate scan
AMECA Certification
ISO 9001 certificate scan
ISO 9001 Certification
REACH declaration scan
REACH Certification
ECE R90 documentation
ECE R90 Documentation
Product Test & Inspection Records
Depending on the product and order requirement, quality evidence can include dimensional inspection, friction-product testing, rotor measurements and batch-related records.
Batch Traceability
Clear SKU and batch identification helps connect a product with the relevant production and order information if a customer later reports an issue.
About us
A Brake Parts Team Focused on Aftermarket B2B Supply
Guangdong Zhenlong Brake Parts Co., Ltd. — Since 2014
Guangdong Zhenlong Brake Parts Co., Ltd. has focused on brake-parts manufacturing and supply since 2014. Our team supports B2B customers across product review, manufacturing, quality control, packaging, shipment and repeat purchasing.
The goal is not simply to send products out of the factory. It is to make the complete purchasing process easier to manage for customers who depend on brake parts as part of their daily business.
2023 Yers Team photo
Sales & Product Team
Works with customer purchasing lists, part-number requirements, quotations and order coordination.
Production Team
Responsible for controlled manufacturing and production execution.
Quality Team
Focuses on product inspection, batch checks and shipment verification.
Technical & R&D Team
Supports friction-material development, product improvement, production-process optimization and technical issue analysis.
See the Factory Behind Your Brake Parts
A supplier relationship becomes easier to evaluate when buyers can see how products are produced, inspected, stored and prepared for shipment.
2025 Year New Factory Exterior
Brake Pad Workshop
Brake Rotor Workshop
Brake Shoe Workshop
Quality Inspection Area
Warehouse & Packing
Since 2014 — brake parts manufacturing, quality control and aftermarket B2B supply.
Case studies
Real Brake Parts Purchasing Problems Require Practical Solutions
Problem · Approach · Value
Good case studies should show more than what product was sold.
They should show what problem the buyer was trying to solve and how the supply process was organized.
Mixed Brake Parts Purchasing for a Distributor
The customer had a long purchasing list containing brake pads, rotors and shoes from multiple existing supplier references.
The list was separated by product category, reviewed and reorganized into one quotation structure. Packaging and SKU information were also confirmed before order preparation.
The customer did not need to search each product manually or manage three separate inquiries.
Brake Vibration Investigation
A repair-side complaint described brake vibration as a “warped rotor.”
The issue was reviewed around rotor runout, DTV, hub cleanliness, pad transfer and installation conditions instead of assuming rotor deformation from the symptom alone.
The troubleshooting process became more specific and reduced unnecessary part replacement.
Contaminated Brake Shoes
Brake shoe lining showed fluid contamination.
The surrounding drum brake system was checked, including the wheel cylinder and possible leakage source.
The repair problem was treated as a system issue rather than simply replacing another set of shoes.
Have a purchasing or brake-service problem that looks like one of these?
Reviews & partners
Trusted by Aftermarket Brake Parts Buyers
Built Through Repeat Supply, Not One-Time Orders
Long-term B2B cooperation is built through reliable products, clear communication and consistent repeat supply.
We value customer feedback that reflects actual purchasing, product and delivery experience.
What Customers Evaluate
Customers typically care about:
Partners & Long-Term Buyers
Our cooperation model is designed for businesses that want a repeat brake-parts supply relationship rather than a one-time retail purchase.
VELTRIX
AUTRIX
ZENTRA
CARVXE
Customer review screenshot
Delivery & after-sales
Support Does Not End When the Order Leaves the Factory
Before Shipment · During Delivery · After Delivery
A B2B brake parts order is not complete just because the goods have been shipped.
Delivery documentation, packaging accuracy and after-sales response all affect the customer’s purchasing experience.
Before Shipment
Products are reviewed against the confirmed order for:
- SKU
- Quantity
- Packaging
- Labeling
- Visible condition
- Shipment preparation
During Delivery
Packing and shipment information is organized to support receiving and logistics coordination.
After Delivery
If a customer reports a product or application concern, useful evidence can include:
- Product number
- Production batch
- Vehicle application
- Photos
- Video
- Measurements
- Packaging information
We use the available evidence to help review the issue and determine the appropriate next step.
Delivery documentation, packaging accuracy and after-sales response are part of the product.
Blog
Latest Brake Parts Insights
Three Articles Worth Reading First
Follow new technical articles, sourcing guides and brake-system discussions created for aftermarket buyers and repair professionals.
Are Ceramic Brake Pads Good? Pros, Cons & Best Uses
Are ceramic brake pads good? A practical guide for repair shops and auto parts stores: ceramic brake pad pros and cons, noise, dust and lifespan, best uses, when to choose semi-metallic instead, and how to evaluate ceramic pad quality on a PO or spec sheet.
What Are Brake Pads? Types, Materials, Parts & How They Work
What are brake pads? A practical B2B guide for auto parts stores and repair shops: how brake pads work, their parts and materials, OE/FMSI/WVA identification, replacement signs, noise and uneven wear, manufacturing and testing.
Ceramic vs Semi-Metallic Brake Pads: 8 Key Differences
Compare ceramic vs semi-metallic brake pads to find the perfect fit for your inventory. Read our B2B buyer’s guide and upgrade stock today!
New technical articles, sourcing guides and brake-system discussions.
FAQ
Frequently Asked Questions About Wholesale Brake Parts
If your question is about a specific reference, quantity or packaging requirement, sending the purchasing list is usually faster than describing it.
We focus on three core aftermarket categories: brake pads, brake rotors and brake shoes. Unlike brake companies with very broad catalogs, we keep the range focused so each product family gets deeper production and quality-control attention.
Our primary supply model is B2B wholesale for auto parts stores, repair shops, distributors and importers rather than one-piece consumer retail. Our car brake parts reach drivers through these professional channels.
Yes. Sending one complete purchasing list is often the fastest way to begin a quotation, especially when your order includes multiple references.
Yes. Multiple brake product categories can be included in the same B2B inquiry and reviewed together.
Yes. Existing supplier references can be used as one of the starting points for reviewing your purchasing requirements.
Private label boxes, labels, barcodes and related packaging requirements can be discussed according to the product and order program. If you already have references, send your part numbers for an OEM quote.
The most useful information includes part numbers, quantities, product category, packaging requirements and your destination market.
Excel purchasing lists are welcome.
We review the available product, batch, vehicle and installation information before determining the appropriate follow-up action.
Send your list
Send Your Brake Parts Purchasing List
Need brake pads, brake rotors, brake shoes — or all three?
Send us one purchasing list and let our team organize the quotation around your actual requirements. You do not need to search every product on the website first.
You can send
RFQ Form
Upload your purchasing list and get a wholesale quote, or request a quote from our contact page.
B2B Brake Parts Supply for Auto Parts Stores & Repair Shops